1. Working principle of the product:

　　The working principle of this atomizing plate is determined by the unique piezoelectric properties of piezoelectric ceramics. Upon receiving a matching electric field signal excitation, the atomizing plate generates a resonant oscillation frequency of 2.4 MHz. Through high-frequency vibration, it cavitates and ejects liquid particles off the water surface, producing a floating mist of water droplets. The atomization generates a large amount of negative ions and small molecular particles, which can increase environmental humidity and freshen the air.

　　The surface of the atomizing plate is coated with a glass glaze that has been baked at a high temperature of 800 degrees. This coating serves to protect the silver electrodes of the piezoelectric plate, enhance the acid and alkali resistance and oxidation resistance of the atomizing plate, and prolong its service life. The atomizing plate is primarily used in various scenarios such as industrial humidification, medical atomization, aromatherapy atomization, environmental humidification, and garden fogging.

　　2、外形尺寸(Appearance and dimensions) 计量单位(Unit：mm)

　　1、压电振动子Piezoelectric vibrator

　　2、橡胶圈 Rubber ring

　　3、黄腊管 Yellow wax tube

　　4、UL1007 24AWG红黑电子线

　　UL1007 24 awg red and black wire electronic line

　　四、测验方法及检测仪器 / Testing methods

　　4.1 测试环境 / Test Environment：23±5℃ 40 ~ 70%RH.

　　4.2 测试仪器 / Test Instrument：

　　4.2.1 HP5100 or ADVAN R3754网络分析仪 Network analyzer

　　4.2.2 阻抗分析仪PV70A impedance analyzer

　　4.2.3 2166A型电容分选仪 2166A-CAPACITANCE sorter

　　4.2.4 LCR数字电桥测试电容及损耗 1KHZ 0.3V测试 The LCR digital bridge test capacitance and the loss of 1 KHZ to 0.3 V

　　V. Precautions:

　　Thank you for choosing our atomizing plate. To safeguard your rights and interests, please be sure to carefully read the precautions for this product, as well as the Technical Acknowledgment for the Atomizing Plate signed with your company, and keep them properly as proof for future services.

　　1. Dry burning of this product is strictly prohibited.

　　In the structural design, the atomizing plate should be installed firmly and flat. The silicone ring is assumed to be a 30-degree silicone.

　　3. It is strictly prohibited to press the ceramic chip to the point where it cannot vibrate, otherwise it will affect the output of atomization quantity and the sensory effect during atomization.

　　4. The connecting wire of the atomizing plate cannot be re-welded, otherwise it may cause damage to the atomizing plate;

　　5. The atomizing plate is made of fragile ceramic material. Avoid applying heavy pressure or subjecting it to strong vibrations or impacts.

　　6. It is strictly prohibited to scratch or prick the atomizing area with sharp or hard objects. Otherwise, the effect of the atomizing plate may be altered or it may be directly damaged.